Car Truck Air Vent Prototype
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prototype, Desk Decoration, Fidget Toy, or anything you want to be.
- Rating
- 0 / 5
- Likes
- 34
- Downloads
- 212
- Makes
- 1
- Views
- 953
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
Car/Truck Air Vent Prototype for your needs.
I Printed with PETG for flexibility
Supports: Yes, Just the Vent
Dimensions:
Resolution: 0.2 mm
Infill: 15%-20%
Brim: Yes, Vent/Frame
STEP 1: Put the Flaps into the holes Make sure the flap with the notch goes in the middle.⬇
STEP 2: Push down the circles at the end of the pegs to cap it off⬇
STEP 3: Slowly Push/wiggle in the whole flap set up into the vent and line up the pegs on both sides. Don’t rush and be careful while pushing it in.⬇
STEP 4: Slow and carefully Push the vent into the frame and watch the side pegs.⬇
thanks for printing!