1 / 2
James Webb Mirror Wall Art (Remixed for larger mirrors)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A scaled-up version of the original.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 26
- Makes
- 0
- Views
- 275
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution
I purchased the wrong size mirrors so I had to scale up, but this meant the pieces didn't fit on my printer. 😭
The mirrors that I used are 2.5" (about ~159%).
If you choose to print this, you'll need: x1 Part A, x6 Part B, x6 Part C, x6 Part D
I've added a little tag so I can wall mount this without glue, you could also embed magnets in part A.
I've also reduced the geometry.
Tips:
- Test fit everything and sand accordingly.
- Print fast, this will take a while.
- You'll need strong glue, I used super glue, but this left nasty white bits, maybe acetone.
- Buy more mirrors than you need (I broke one)
- Glue the pieces together from both sides, they are very flimsy.
