1 / 3
Foot for Yocan Pillar
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This a foot for the Yocan Pillar. I kept knocking it over so I designed this foot to prevent that sort of thing.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 0
- Views
- 190
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to be friction-fit. I use a 0.6mm nozzle so I included some 0.4 versions too, but I haven't tested those so, if it doesn't fit properly, you might have to adjust some of your slicer settings. There are three sizes; 125mm, 110mm, and 85mm. The 125 is kinda ridiculous, but the other two both work pretty well. Personally, I use the 110 (the one in the pictures). P.S. Don't judge the pictures too harshly. I was in a hurry, so I printed at a 0.4 layer height.