1 / 3
Foot for Yocan Pillar
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This a foot for the Yocan Pillar. I kept knocking it over so I designed this foot to prevent that sort of thing.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to be friction-fit. I use a 0.6mm nozzle so I included some 0.4 versions too, but I haven't tested those so, if it doesn't fit properly, you might have to adjust some of your slicer settings. There are three sizes; 125mm, 110mm, and 85mm. The 125 is kinda ridiculous, but the other two both work pretty well. Personally, I use the 110 (the one in the pictures). P.S. Don't judge the pictures too harshly. I was in a hurry, so I printed at a 0.4 layer height.