1 / 2
Nerf Glowstrike Captain Phasma Star Wars Dart Blaster charge handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is to replace just the charge handle on this model Nerf blaster
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 55
- Makes
- 0
- Views
- 685
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Public Domain
The original charge handle was broken and missing so I had to eyeball the dimensions a bit, but it works well. Printed it thick with PETG to make sure it wouldn't break, especially around the thinner region near the screw hole.
Polymaker PETG
0.6mm nozzle
adaptive layers (0.15mm-0.3mm)
3 top/bottom layers
5 walls
50% infill gyroid
Lay the handle flat on its side and use supports, including internal. It's a bit of a pain to remove but keeps the hole the right size to slide onto the mount.