1 / 2
Bottle rack
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modular water bottle rack that can print stacked.
- Rating
- 5 / 5
- Likes
- 740
- Downloads
- 2,258
- Makes
- 28
- Views
- 10,317
- Reviews
- 25
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
I wanted to challenge myself to design a water bottle rack that could hold 12 water bottles and also be printed/assembled in less than 1 day.
Note: pictured 32oz Nalgene only fits on top row
Non-Printed Parts
- for each bottle x2 - 5/16" (8mm) wood dowels cut to 7.5" (190mm)
* UPDATE: there are now remixes for printed dowels if thats your jam.
Print Settings
I suggest printing a couple of the smaller top models to test tolerances/fit before full send. The parts off my printer fit fairly tight and took some force to assemble.
*Stacked print settings*
- Layer Height: 0.2mm (required for stacked model stls)
- Perimeters: 2 is sufficient for structure
- Infill: 10-15%
- Bottom shell layers: 4
- Ironing: (Optional) All top surfaces
Example of sliced plate printing in 10hrs for 12 bottles (no ironing)
Assembly
- Assemble both printed part sides
- Attach cut dowels to one side
- Set the dowel side on a flat surface with dowels facing up
- Install the other side - place second assembled side on top aligning the dowels and getting them started into the holes. Start from one side pressing the dowels until they are fully seated.