1 / 5
Fire extinguisher holder for the trunk of a car — image 1
1 / 5

Fire extinguisher holder for the trunk of a car

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fire extinguisher holder for quick access in the trunk.

Rating
0 / 5
Likes
15
Downloads
59
Makes
0
Views
671
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

The holder is at a 20-degree angle, and for attachment in the trunk, adhesive hook and loop fasteners are required. Part of the fasteners will adhere to the bottom of the holder, and part to the side, where a flat surface is prepared for them. No supports are needed. Due to the temperatures that can occur in the car during summer, I would recommend TPU. However, since I didn't have it, I used PLA. If there is an issue, I will reprint the holder.

The inner diameter is 83.5mm and the height of the tube is 140mm.

Tags