Prusa XL X axis dial indicator mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
X Axis dial indicator mount for checking and adjusting bed level
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 32
- Makes
- 0
- Views
- 273
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This mount clips onto the X-axis rail of the Prusa XL and holds a dial indicator with a 3/8" (.375") stem.
I used this to check and adjust the bed level after receiving my XL. I found mine was out a total of .052" (1.32mm) difference from front to rear of the heat bed frame. with this I was able to adjust within .001".
A quick way to tell that you need adjustment is by placing a piece of tape near the bottom of one of the Z axis lead screws and then watch a test print. If you have a test print that moves all the way from the front to the rear of the heat bed, and you see more than ½ rotation of the lead screw, you might want to adjust level and save some wear on the lead screw nuts.
Printed from PETG
- .2mm layer
- 3 perimeters
- 20% Gyroid infill
- printed in about 35 minutes on my MK3s+