1 / 6
XH-M372 Housing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An easy housing for a XH-M372 audio isolation module.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
I used 4x M3 thread inserts with 4mm diameter and 4mm length. I put them into place with a soldering iron heated to ~250°C.
As screws I used 4x M3x8mm countersunk head.
The housing was printed with a 0.6mm nozzle at 0.25mm layer height with transparent PLA, but other configurations should work without issues as well. I just recommend to print both parts in parallel, as the little counterpart in the bottom part might become to hot and unstable during the print otherwise.