Adafruit Heat Set Insert Press Counter Weight For CNCKITCHEN Attachments
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
All in one housing CNCKITCHEN TS100/TS101/Pinecil Adaptor and Tips
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 38
- Makes
- 0
- Views
- 518
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Wanted more weight and a spot for me to put the CNCKITCHEN TS100/TS101/Pinecil Adaptors and tips whenever I am not using the stand. I used M5 x 20mm hex bolts and 2 x M5 Nuts for extra weight. I also included 2 spots for extra soldering iron tips for storage when you are not using the jig.
I wanted the counterweight to be heavy enough to automatically lift the soldering iron after setting the heat set insert.
I also made a 1 attachment version as well as a 2 attachment version. I also included 2 versions of each with the Bits being on either the Left or the Right side. I have only printed and tested both the Left and Right versions of the 2 attachment variations.
I am lefthanded so I prefer the bits being on the Right side as they are out of the way when I push down on the handle.
Hardware I used:
6 x M5x20mm Hex Bolts
12 x M5 Nuts