Adafruit Heat Set Insert Press Counter Weight For CNCKITCHEN Attachments
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All in one housing CNCKITCHEN TS100/TS101/Pinecil Adaptor and Tips
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 518
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Wanted more weight and a spot for me to put the CNCKITCHEN TS100/TS101/Pinecil Adaptors and tips whenever I am not using the stand. I used M5 x 20mm hex bolts and 2 x M5 Nuts for extra weight. I also included 2 spots for extra soldering iron tips for storage when you are not using the jig.
I wanted the counterweight to be heavy enough to automatically lift the soldering iron after setting the heat set insert.
I also made a 1 attachment version as well as a 2 attachment version. I also included 2 versions of each with the Bits being on either the Left or the Right side. I have only printed and tested both the Left and Right versions of the 2 attachment variations.
I am lefthanded so I prefer the bits being on the Right side as they are out of the way when I push down on the handle.
Hardware I used:
6 x M5x20mm Hex Bolts
12 x M5 Nuts