1 / 1
Prusa MK4 / MK3 Lengthened Spool Holder Endpart for 2kg spools — image 1

Prusa MK4 / MK3 Lengthened Spool Holder Endpart for 2kg spools

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Lengthened spool holder end part, modified to hold 2 kg Prusament spools

Rating
5 / 5
Likes
3
Downloads
86
Makes
1
Views
380
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Bought the 2kg Prusament spool and didn't like the Prusa 2kg spool holder as I also want to use the filament guide and hold a 1kg spool in parallel.

So, I took BrunoLeScribe's model and lengthed it to fit the 2kg spool.

Print instructions

Printed .15 layer height; 4 parameters; 50% gyroid infill; with CF-PETG material.

Would recommend PETG or PC for good layer adhesion. Personally found PLA and ASA a little brittle / not as good in layer adhesion.

If the fit is too tight, don't force it and scale XY down a little, depending on machine tolerance.

Tags