Ikea Skadis Top Shelf doublesided 36.5cm x 18cm / 20cm / 36.5cm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Top Shelf for desk mounted Skadis. 3x variants (18/20/36.5cmx36.5cm) to fit on all 3 board sizes: 76cm, 56cm and 36cm.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 352
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks to Just Joshi for this original part.
The Shelf has a depth of 36.5cm. There are 2 variants in the width, one with 18cm and one with 20cm. Therefore it fits on all 3 Skadis models.
!!! Attention: You need a big printbed to print it! 36.5cm x 36.5cm/20cm/18cm !!!
For the 76cm Skadis board you take 2x 18cm + 2x 20cm.
For the 56cm Skadis board you take 2x 18cm + 1x 20cm.
For the 36cm Skadis board you take 2x 18cm.
And if you have more than one Skadis board and use them in corner i designed a variant for it.
For ex.: 2 Skadis boards in an corner. 1x 76cm and 1x 56cm. If you want to completely fill out the Top you would need for the 76cm board 1x 18cm + 2x 20cm + 1x inner corner. For the 56cm board you would use the inner corner from the 76cm board + 1x 20cm + 1x 18cm.
Print instructions:
Filament: PLA
Supports: Not needed
Brim: I didn't use, but for better adhesion you could use)
Infill: 10%
Printbed: 60°C first layer, other 55°C
Cooling: 75-100%
Heat: 210°C first layer, other 205°C
Speed: 80-100mm/s
Maybe you add print bed glue or other adhesion on the printbed for the bigger parts. Otherwise the edges could go up…
I added print files for PLA (i printed it with PrimaCreator PrimaValue PLA Dark Grey) and as 3d printer i used the Anycubic Kobra 2 Max. But on print i switch it to “stable”. The layer height of the print ist 0.15mm.
And If you are looking for a single sided Design, try this:
https://www.printables.com/de/model/776390-skadis-top-shelf-20cm-or-18cm-width-and-18cm-depth
