1 / 3
Ikea Skadis Top Shelf doublesided 36.5cm x 18cm / 20cm / 36.5cm — zdjęcie 1
1 / 3

Ikea Skadis Top Shelf doublesided 36.5cm x 18cm / 20cm / 36.5cm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Top Shelf for desk mounted Skadis. 3x variants (18/20/36.5cmx36.5cm) to fit on all 3 board sizes: 76cm, 56cm and 36cm.

Ocena
0 / 5
Polubienia
4
Pobrania
14
Wydruki
0
Wyświetlenia
352
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Thanks to Just Joshi for this original part.

The Shelf has a depth of 36.5cm. There are 2 variants in the width, one with 18cm and one with 20cm. Therefore it fits on all 3 Skadis models.

!!! Attention: You need a big printbed to print it! 36.5cm x 36.5cm/20cm/18cm !!!

For the 76cm Skadis board you take 2x 18cm + 2x 20cm.

For the 56cm Skadis board you take 2x 18cm + 1x 20cm.

For the 36cm Skadis board you take 2x 18cm.

And if you have more than one Skadis board and use them in corner i designed a variant for it.


For ex.: 2 Skadis boards in an corner. 1x 76cm and 1x 56cm. If you want to completely fill out the Top you would need for the 76cm board 1x 18cm + 2x 20cm + 1x inner corner. For the 56cm board you would use the inner corner from the 76cm board + 1x 20cm + 1x 18cm.

Print instructions:

Filament: PLA

Supports: Not needed

Brim: I didn't use, but for better adhesion you could use)

Infill: 10%

Printbed: 60°C first layer, other 55°C

Cooling: 75-100%

Heat: 210°C first layer, other 205°C

Speed: 80-100mm/s

Maybe you add print bed glue or other adhesion on the printbed for the bigger parts. Otherwise the edges could go up…

 

I added print files for PLA (i printed it with PrimaCreator PrimaValue PLA Dark Grey) and as 3d printer i used the Anycubic Kobra 2 Max. But on print i switch it to “stable”. The layer height of the print ist 0.15mm.

And If you are looking for a single sided Design, try this:

https://www.printables.com/de/model/776390-skadis-top-shelf-20cm-or-18cm-width-and-18cm-depth

Tagi