Spool holder (With OnShape link)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spool holder for eSUN filalments (and maybe other brands) Bearing needed: 25x52x15(6205/7205) or 25x52x20.6 (5205/3205)
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 17
- Makes
- 0
- Views
- 230
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I designed this spool holder for my 1kg eSUN spools, and to make use of a bearing I have had in my garage for ages (6205/25x52x15 - single row deep groove).
It works well enough, but there is a tiny bit of sag with the 6205 bearing, because they are not designed to work with moment/tilting loads. Bearing 7205 (same dimensions) is a angular contact bearing and should be a better choice.
Bearing 3205/5205/25x52x20.6 (double row bearing) are a bit wider but will handle the moment/tilting loads and probably get rid of the small sag. I have added files to accommodate these bearings as well, but I have not tested them. They are pretty expensive though, compared to the 6205 and 7205 bearings and not really necessary.
Max outside diameter of the spool holder: 208mm
Fits spools with a 54mm center hole.
Designed using OnShape (free edition) - You can all download, export or edit this file to fit your spools.
Tolerances:
This bearing has an outer diameter of 52mm, the bearing “housing” has a diameter of 51.9mm and that worked out well for me.
The inner diameter of bearing is 25mm and the shaft is set to 25.2mm for a an interference fit.
You should be able to open the OneShape file and edit these dimensions if they don't work for you.
Suggested print settings:
- Outer before inner (print outer walls before inner walls)
- Wall line count: 4
- Infill: 10% Gyroidal
- Supports: No
- Layer height 0.24