1 / 4
External Fibre/Cable Wall Entry — image 1
1 / 4

External Fibre/Cable Wall Entry

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

External Fibre/Cable Entry Wall Plug

Rating
0 / 5
Likes
1
Downloads
20
Makes
0
Views
224
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I needed to create an entry plug that could be fitted around an external grade fibre bundle (fibre OD ~5.8mm) and allow it to be gently bent towards the wall. This fits a ~40mm masonry core drill to allow the bundle of pre-terminated fibre connectors to be pulled through as well.

There are two versions - a straight through (for internal side of cavity, or as needed) and a gentle bend version that allows the fibre to be bent with a drip loop to stop rainwater entering the cavity without violating the static bend radius of the fibre.

The design is split into two parts to allow for clipping over the fibre and has a couple of bendable tabs to friction fit into the hole (or can be fitted with sealant as desired). You will need to print both halves of the version you would like, plus two of the dowels to fit the design together. It's designed so that you can print with both sides flat to the bed without the need for supports. Print the dowels upright.

CAD Design uploaded so you can tweak hole sizes as needed for your application. Would work equally well for cables.

Tags