1 / 2
tool holder for OPE (original prusa enclosure)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
there are plenty models around, but nothing that sufficed my needs.
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 105
- Makes
- 4
- Views
- 672
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
this is something I wanted to have since I assembled the MK4 kit and the enclosure kit. Some place to put the tools that came with the kits plus some of my every print tools like a caliper, side cutters and a brush to clean the display.
You'll need 2pieces of M3x30 DIN912 screws and 2 pieces of M3 hex nuts (from your spare parts). If you have the handles printed and attached to the enclosure as well, you can use one existing nut instead. If not, you can screw it from the inside with nuts in the given pockets in the part.