T12 soldering station (compact).
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Super compact soldering station for 6pcs T12 tips, a de-soldering vacuum pump and a sponge.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 15
- Makes
- 0
- Views
- 186
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Super compact soldering station for 6pcs T12 tips, a de-soldering vacuum pump and a sponge.
With the possibility to rest a T12 iron as well.
The idea is to stack the solder spools on the de-soldering-vacuum-pump-thingy to get a stable and compact solution with everything you need to do basic soldering.
There is also 2 tabs on the back for extra support and stability, they're meant to be used as is, or you can drill holes for fastening with screws, or just cut them off with an x-acto knife.
Cut 2 sheets of aluminum foil about 32mm x 66mm and place under the sponge to prevent the plastic from melting after cleaning the tip on the sponge (see last picture).
Will print OK on low/fast settings.
Print Settings
Printer:
Any
Rafts:
No
Supports:
No
Resolution:
Any
Infill:
12% or more
Filament:
Any PLA or other hard plastics.
Any
Notes:
If there is any interest I might do a version with room for more T12 tips.
Category: Electronics