1 / 4
XBOX Controller Soft Joystick Covers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TPU replacements for the soft rubber covers on XBOX controllers or similar handheld controllers.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 42
- Makes
- 0
- Views
- 414
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
I've long had issues with rubber wearing off of XBOX controller joysticks after a period of time. I created this model to replace the worn away rubber with a TPU cover.
Print Information
Material: TPU 95A*
Nozzle Diam: 0.40mm
Layer Height: 0.10 mm
*Be sure to verify that the print bed you plan on using is appropriate for TPU.
Installation Instructions
- Cut away any remaining rubber with a utility knife.
- Clean the area with a dremel wire wheel (Optional, but useful to be sure any of the old material is gone).
- Clean joystick surface with IPA. Be sure surface is free of dust or debris.
- Apply super glue to the top surface.
- Slip the two printed halves of the soft cover onto the joystick.
- Hold halves in place for approximately 30 seconds or until super glue cures.