1 / 3
Display and switch housing from bentobox
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
display and switch housing from bentobox.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 1
- Views
- 316
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Display and switch housing from bentobox. A switch for turning on the bento box and a display showing the temperature and humidity in the chamber. The switch I used is a regular switch with dimensions of 12x19mm. The temperature and humidity meter is easily available on auction websites. To pass the cable with the probe through the hole in the printer housing, you need to unsolder it from the display and then put it back through the hole. To better hold the housing, you can use double-sided tape.
Requires supports for correct printing.