FRC Limelight 3 MK4I Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount for the limelight 3, with adjustable positions in 15 degree increments.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 295
- Makes
- 0
- Views
- 1,537
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution
A mount for the limelight 3, with adjustable positions in 15 degree increments. The holes for the mounts are sized for 10-32 bolts (.201"), and adjust from 0-45 degrees. An extra mount file for both the base and the limelight are included that both have hexagons cut out from the bodies simply because “hexagons are the bestagons.”
The plate is mounted to the swerve using zip ties (very official). It has a cutout for the encoder, but must be put on before the encoder guard for the MK4i swerve modules. The encoder guard serves as a last ditch salvation if the zip ties securing the mount to the swerve break.
The limelight 3 is also mounted to the mount with zip ties (also very official).
The limelight mount is designed to be put on the back right of our robot, but the step file could be mirrored around to fit any of the swerve modules.