Bike cable/hoses guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Divider for the cables/hoses to stop the rattle that is easy to disassemble for service
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 38
- Makes
- 0
- Views
- 735
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This is a simple divider for the shifter and the dropper post cables and the brake hoses. The idea is to stop the rattle. Design to be easy to disassemble for service.
Designed for 2x 5mm brake hoses and 2x 4.2mm cable housing.
It requires additional hardware:
1 pc M3x16mm hex bolt (DIN 912, ISO 4762 or similar)
1 pc M3 nut (recommend to use nylon insert lock nut) (DIN 985, ISO 10511 or similar)
Tested for more than 1 year with PETG and it holds perfect! PLA can be an option as well, but I have not tested it.
Prints without support. Use skirts if you have lift issues.