MiLight Hub Enclosure and USB Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple enclosure and mount to house an implementation of the ESP8266 MiLight Hub project
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 190
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This is a simple enclosure that incorporates a USB mount, reset switch and access to status light for a D1-Mini implementation of the 8266 Milight Hub project.
This is printed in 3 parts, the main enclosure, the reset button (not essential) and the USB mount (also not essential). If the reset switch is wanted then this needs to be in place before the D1-Mini is slid into the housing.
This was printed with a 2.5mm layer height, no supports, print the enclosusre standing upright with the large opening at the top.
This is printed with Prusament PLA (Black Galaxy) filament, I particularly like the way the fleck shows up in the prints.