PS3 Slim disk tray magnet holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.36 – €0.44 net (excluding VAT)
For file: PI3MK3M_PS3Slim_MagnetHolder_nozzle0.4_layer0.1mm_34min.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.40 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 30 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replacement part for PlayStation 3 Slim. Plastic holder for magnet in disk tray.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 172
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
I made this model for my PS3 slim that was making an abnormal sound when reading a disk. I figured out the problem, the magnet holder in disk tray had been damaged.
The default settings have made good results after a few test prints. I had problems with supports in Prusa slicer so I used Cura insted. This model needs supports!
Printed in PLA (PETG and ABS would work too)
Quality/layer height 0.1mm
Perimetres 2
Speed 60% (need to be slow for good result)
Infill 20%
Auto generated supports (touching buildplate)