Sonic Pad Mount for flexible arm
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.81 – €5.88 net (excluding VAT)
For file: CE3E3V2_Sonic Pad Mount.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.34 excluding VAT (range midpoint).
- Weight reported by the author
- 57 g
- Print time reported by the author
- 6 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Mount for a Creality Sonic Pad, to swivel it around
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 32
- Makes
- 0
- Views
- 518
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Ive built myself an Ikea Slacklack and sourced the electronics out of it. So the Sonic Pad was lying around somewhere. Now i had enough of it and remixed a Mount for FunkyArts Flexible Phone Arm, where i found the perfect solution in rsmummerts workbench mount.
Since the Sonic Pad is not really a phone, you will need to apply a certain amount of torque. To make it move easier, I applied a certain amount of “SchmierFix” by LiquiMoly on the joints, so they won't jam.
The cables have a little problem, but i ordered some 90° angled USB-ports to fix the issues.
Printed in PETG. Its twocolored, because the first Spool of PETG ran out and i had to solve it quickly.
If your printer is bad in doing overhangs, you will need to use supports