1 / 7
Eclipson Model S FPV canopy
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lightweight FPV canopy for Eclipson Model S. Designed for DJI O3 unit, but any vista should fit too.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 24
- Makes
- 0
- Views
- 324
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
FPV canopy for Eclipson Model S. Designed for DJI O3 unit, but any vista should fit too.
Features:
- 9g servo mount for pan
- holes to zipties
- O3 antenna mount
- Secure canopy in place using M4 bolt
Pan tilt system is not included. Camera mount is not included too!
How to print:
- !!!! USE BRIM !!!! or canopy can detach from build plate mid print. Contact surface is very small.
- Orient both canopy pieces so they stand vertically.
- No supports needed.
- Print both canopy pieces with your eclipson A/LW profile (single wall, no infill, 1 top 1 bottom layer)
- Print holder.stl with 3 walls, 30% infill, 3 bottom 3 top layers. Make sure its bottom surface lays flat on the build plate!
I used esun PLA+ for all canopy pieces but you can use any filament you want. For O3 air unit, i would recommend using something that can resist its high temperatures.