1 / 3
Original Prusa Enclosure PTFE Tube Clip — image 1
1 / 3

Original Prusa Enclosure PTFE Tube Clip

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€0.13 – €0.15 net (excluding VAT)

For file: Clip_0.4n_0.2mm_PETG_MK4_11m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.14 excluding VAT (range midpoint).

Weight reported by the author
1 g
Print time reported by the author
10.8 min
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Clip to stow away the PTFE tube inside your Original Prusa Enclosure during maintenance or when using a MMU

Rating
5 / 5
Likes
29
Downloads
168
Makes
6
Views
492
Reviews
6

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Everytime you're doing maintenance on your MK inside the Prusa Enclosure the PTFE tube for the filament will hang off right in the middle and is always in your face.

Or you're using a MMU but still want to run single color prints off the standard setup, you'll have the PTFE tube from the MMU hanging around.

I made a simple clip that can be mounted to the hole above the transport handle (or any other free hole) with a M3x4 screw that comes with your Prusa Enclosure kit, it's the perfect spot when you want to stow away the PTFE tube.

I ended up mounting two, one for the default PTFE tube and the second one above the transport handle for the MMU PTFE tube (when it finally gets shipped).

Tags