New wire shelving backstop clip - connecting rods
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.57 – €1.91 net (excluding VAT)
For file: SHELVE Verbinder A+B+C_0.3mm_PLA_MK3S_1h29m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.74 excluding VAT (range midpoint).
- Weight reported by the author
- 27 g
- Print time reported by the author
- 1.49 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Rods for connecting "New wire shelving backstop clips" to each other, more stability and fall protection
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 22
- Makes
- 0
- Views
- 191
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
New wire shelving backstop clip - connecting rods
Thanks again to the original author of the backstops / shelf dividers "Triple G Workshop".
In order to achieve added stability and protection, I have designed connecting rods for the "New wire shelving backstop clip", with which several of them can be easily connected. There are 3 different ones in total to allow the individual parts to be connected at the same height. The length was based on the requirements of the Amazon shelf, for which I remixed the backstops from the original. They are the same for the width and depth of the shelf. The rhombuses fit quite precisely into the similar holes in the middle of the shelf dividers, both the old ones and the newly designed ones for the sides, front and back.
If different or different lengths are required, please let me know...
Material: PLA, HT-PLA, PETG
Slicing: 0,3mm draft, 0,2mm
Supports: none
P.S.: for the good observers among you, the right strut in the photos is still the first version, the ones from the 2nd remix are currently being printed...
See also:
https://www.printables.com/de/model/775181-wire-shelving-clip-in-dividerstoppers-adapted-for-
and https://www.printables.com/de/model/789673-new-wire-shelving-backstop-clip
…………………………………………………………………………………………………………………………………………….
New wire shelving backstop clip - Verbindungsstäbe
Nochmals Dank an den ursprünglichen Verfasser der Backstopps / Regalteiler "Triple G Workshop".
Um einen Mehrwert an Stabilität und Schutz zu erreichen, habe ich Verbindungsstäbe für den "New wire shelving backstop clip" konstruiert, womit sich meherere davon einfach verbinden lassen. Es sind insgesamt 3 verschiedene, um die Verbindung zwischen den Einzelteilen auch auf gleicher Höhe zu ermöglichen. Die Länge richtete sich nach den Erfordernissen des Regals von Amazon, für das ich die Backstopper vom Original remixed hatte. Sie sind dabei für Breite und Tiefe des Regals gleich. Die Rhomben passen ziemlich genau in die gleichartigen Löcher in der Mitte der Regalteiler, sowohl der alten, wie auch der neu konziperten für Seiten, Front und Rückseite.
Sollten unterschiedliche oder andere Längen gewünscht sein, lassen Sie es mich wissen...
Material: PLA, HT-PLA, PETG
Slicing: 0,3mm draft, 0,2mm
Stützen: keine
P.S.: für die guten Beobachter unter Euch, die rechte Stütze n den Fotos ist noch die erste Version, die vom 2. Remix sind gerade im Druck...
Siehe auch:
https://www.printables.com/de/model/775181-wire-shelving-clip-in-dividerstoppers-adapted-for-
und https://www.printables.com/de/model/789673-new-wire-shelving-backstop-clip
………………………………………………………………………………………………………………………………………………