KitchenAid Dishwasher Replacement Parts Wheel Rack Shelf Release Hinge Pin Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement Wheel and Upper Rack Release Hinge Pin
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 1
- Views
- 397
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Print in ASA or PC or some other polymer with a high heat deflection temperature (should be above 90-100c).
I find printing completely solid ensures part won't deform under the heat.
I used 1 wall, 100% infill.
On the upper rack part there is a hole to feed a paperclip through to give the part a little extra strength, though its not strictly necessary.
CAD: https://cad.onshape.com/documents/91bab7f03a8e0223b84cb8ac/w/81f512f061f25a69d256dccf/e/b6695e7bfc4d2b19847e5dfc?renderMode=0&uiState=65e508cee0fb4724a9518444
P.S. Yeah that photo of the wheel is kinda gross, I tried to clean it… dishwashers are kinda gross