FT2232H Development Board Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An enclosure for FT2232H development boards you can usually find in stores like Aliexpress.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 161
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This enclosure is for this model of the FT2322H development board. There are many more from other vendors, but make sure it is this exact model if you want to use this case, because there are different designs. The enclosure consists of two parts that must be attached to the board and closed using 4xM3 screws.
I use this board as a cheap FT2232H programmer for microcontrollers, CPLDs and FPGAs. For that use case, I recommend soldering to the board only a 6 pin 2.54 mm pin header as shown on the photograph, removing the third pin to use it as polarity key. Then on the female pin header insert a pin on the third hole to prevent the connector being reversed, as shown on other photograph.
FreeCAD design files are included in case you need to change anything.