*OLD* Tool-Grid 19mm Wheel Lock Key Socket
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€19.31 – €23.61 net (excluding VAT)
For file: 19mm-Wheel-Lock-Key-Socket__33m36s.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €21.46 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 34 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
** NEW SET HAS RELEASED **
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 25
- Makes
- 0
- Views
- 280
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Wheel Lock Key Holder for Matco Tool-Grid Tool Box organizer system. Holds one 19mm Hex Wheel Lock Key however I made the diameter of the socket 23mm for a loose fit and ease of inserting and removing the key from the holder as well as slightly curved edges for appearance. The bolts that come with the Tool-Grid kit will work perfectly fine with this and bolt hole is useable.
WILL NOT SCALE (effectively), it will cause the Tool-Grid mounting hole to be improperly sized.
Any suggestions? Please let me know in the comments!
- Basic Print Settings
Material: PLA
Layer Height: 0.20mm or 0.10mm for better appearance
Infill: 15%
- Dimensions
Height: 24.3mm
Diameter: 29mm
- Socket Dimensions
Diameter: 23mm
Depth: 17mm
Surface Height: 7.3mm