1 / 3
3/4'' inch socket wall holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3/4'' inch socket wall holder
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 111
- Makes
- 0
- Views
- 294
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
3/4'' wall holder for sockets extensions etc.
with locking tap so it can hold the items even hanging upside down i tested this with several extrentions and the biggest socket i had and it held just fine.
i found that first time putting a socket on it can be a bit thight but after that it felt smooth.
i printet mine with petg at 1,8 layer height
and i suggest going for under 2 mm layer height as the tolerance for locking part is about that
i used 40% infill and it is plenty strong
fell free to remix this to a pegboard version if you want