1 / 4
PDMOVIE Focus Controller Extension
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An "Extension" for the Focus Controller by PDMOVIE. Make it Big!
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 32
- Makes
- 0
- Views
- 255
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently acquired the LIVE AIR 3 SMART Lidar Autofocus System manufactured by PDMOVIE. Along with it, I received a Focus Controller that can be conveniently attached by screwing it onto accessories such as the SmallRig NATO Handle or similar items.
While the Controller functions flawlessly without any additional accessories, I found myself desiring a larger wheel for easier manipulation. Consequently, I promptly designed a few options to address this preference.
| IMPORTANT & DISCLAIMER ||||||||||
- I do not take any responsibility for damaging your gear, use caution!!
- The Wheels have a good fit and do not require further fastening, at least with regular PLA (tested with Bambu PLA Basic).
- If you print with PLA-CF like I did, you may need to sand the wheels just a tiny bit (tested with Bambu PLA CF).
- Did not test it with other Filament
- Was printed on a Bambu Lab XC1
| PRINT SETTINGS ||||||||||
- Walls: 3
- Infill: 10
- Infill Pattern: Gyroid
- No Brim
- Orientation: Flat
If you like this Design, share some Love 🧡 & leave a Like 👍