1 / 4
PDMOVIE Focus Controller Extension
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An "Extension" for the Focus Controller by PDMOVIE. Make it Big!
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently acquired the LIVE AIR 3 SMART Lidar Autofocus System manufactured by PDMOVIE. Along with it, I received a Focus Controller that can be conveniently attached by screwing it onto accessories such as the SmallRig NATO Handle or similar items.
While the Controller functions flawlessly without any additional accessories, I found myself desiring a larger wheel for easier manipulation. Consequently, I promptly designed a few options to address this preference.
| IMPORTANT & DISCLAIMER ||||||||||
- I do not take any responsibility for damaging your gear, use caution!!
- The Wheels have a good fit and do not require further fastening, at least with regular PLA (tested with Bambu PLA Basic).
- If you print with PLA-CF like I did, you may need to sand the wheels just a tiny bit (tested with Bambu PLA CF).
- Did not test it with other Filament
- Was printed on a Bambu Lab XC1
| PRINT SETTINGS ||||||||||
- Walls: 3
- Infill: 10
- Infill Pattern: Gyroid
- No Brim
- Orientation: Flat
If you like this Design, share some Love 🧡 & leave a Like 👍