Yok's toolhead for Flsun SR
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom extruder for the flsun SR with low COG
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 57
- Makes
- 0
- Views
- 469
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
So after a few weeks of trying this extruder I decided it finally time to release it
This project was supossed to be a remix of the popular utoolhead made by VICLER but it ended up being something else.
Overall the extruder is thicker.
CPAP duct was made by cothyh: https://www.printables.com/@cothyh_202394
It uses a sherpa mini idler arm so all crediits go to the annex engineering team for their great design!!!!
DISCLAIMER: It uses the same chopped down heatsink for the hotend, heatsink must be 25mm tall.
BOM
(4x) M3x4 heat inserts (for the extrudder body)
(5x) M3x8 heat inserts (for the extruder mount and 5015 mount)
(2x) M3x6mm scews (front plate)
(4x) M3x12mm screws (hot end fan)
(2x) M3x8mm screws (extruder mount)
(2x) M3x15mm screws (motor and fan mount)
PTFE tube (measurement will depend on the hotend)
A set of BMG gears
3010 24v fan
5015 24v fan
Enjoy!!