Bambu AMS Disconnect Tool w/ embedded magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bambu AMS Disconnect Tool by https://www.printables.com/@Jody with embedded circular 3x2 mm magnets.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 140
- Makes
- 2
- Views
- 765
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I really like the original model but wanted the magnets to be embedded. Pause the print before the cavities get covered and insert two 3x2 mm magnets. The fit is quite tight which also prevents the magnets from sticking to the magnetic nozzle, add a dot of glue if necessary. The magnets are disposed around the center of mass instead of the center of the length of the tool to prevent it from rotating once stuck to the magnetic surface. On the X1C it can sit on the rear panel, just above the filament buffer.
Exemplar in the pictures:
Printer: Bambu Lab X1C with AMS
Nozzle: 0.2 mm (to have the lettering come out nicely defined)
Filaments: Polymaker PolyTerra PLA Charcoal Black
Spectrum Silk PLA Spicy Copper