1 / 1
Wall mount for Meross MH300 and MS100F
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount for Meross MH300 Wi-Fi Hub and MS100F temperature sensor
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 28
- Makes
- 0
- Views
- 244
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print with TPU, will likely not work with a stiff/non elastic filament!
Use 0.45mm outer perimeter
3mm Countersunk screws
The model named Tighter has a lesser radius of 0.1mm