1 / 1
Barrel air vent with NPT and NPS 3/4" threads
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 55 gallon drum air vent model with NPT and NPS threads to thread in directly to the air vent bung hole.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 80
- Makes
- 0
- Views
- 464
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
55 Gallon drums/barrels TYPICALLY have a 2" NPS, and a ¾" NPS hole. NPS is not compatible with NPT (ask me how I know). This model is for the smaller ¾" threads. This remix only adds the body.stl from the original thing. Still get the cap from there, but you dont need to print the nut anymore.
If you're putting this into an american barrel, try the NPS model first, its extremely likely thats the one you need. I added NPT just in case someone needs it for a non-barrel reason.