threaded through hole with slot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this for a heated drybox for the heater, but it should work with any standard 2 conductor electrical wire.…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I made this for a heated drybox for the heater, but it should work with any standard 2 conductor electrical wire.
Threaded parts designed for a 20mm hole, but flange should work with up to a 26mm hole.
Has a slot in both parts to allow you to place over a wire without having to cut ends to get wire through.
Might recommend an oil or lubricant on back nut as it can be a little tough to thread dry, but once its tightened down it is not going anywhere.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2
Infill:
40%
Filament: generic pla
Category: DIY