1 / 5
Decent Espresso Grouphead Knob - Wavy
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wavy replacement grouphead knob for the DE1 espresso machine
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 244
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Find yourself hitting the DE1 grouphead handle while pulling shots and steaming drinks? This handy print will replace it with a much more reasonably sized and stylish knob.
It requires only a 20mm x M10 set screw to attach it to the DE1's grouphead, which should probably be tapped first for a sure fit.
Print Settings
- Walls: 3
- Infill: Gyroid (25-30%) or Cubic (35-40%)
- Layer Height: smaller the better, either 0.08mm or variable
Additional Requirements
- M10 set screw (20mm long)
- M10 tap (optional - you can try to tap it with the set screw if you'd prefer)
- Spacer (you can use the one on your existing grouphead handle)