Counting matching models…
This is my interpretation in Gauge 1 (1:32) of the DE1 railcar designed by Allan (Rotterdam) for the “Nederlandse Spoorwegen” in ‘50’s. https://en.wikipedia.org/wiki/Blue_Angel_(train) https://nl.wikipedia.org/wiki/Blauwe_Engel These…
This is a bat top replacement for the Arcade1up joystick with ball tops. Bat tops have a much better feel to me so I quickly made this to replace the ball top on my machine. Have installed these on three different machines without issue.…
Was noticing some bugs were getting into my tank, modeled up this lid to help reduce the problem. Would be best to add a food safe coating to the outside of the print since water can come in contact.
I needed a model of the DE10 Nano for a future project. No one had posted one yet so here you go. This is not meant to be printed but used for creating cases and the like. Category: Gadgets
See the youtube video for details. The extruder requires three or six MF85ZZ flanged bearings and three or six countersunk M3 screws. The flanges on the bearings need to be ground to 9.1mm diameter edges. Alternatively, pick your own…
A simple protective case for the DE10-Lite. Designed to be simple but effective, the standoffs fit into the holes and the board clips into place. Designed for 0.2mm layer height and 0.4mm nozzle. Can be printed with no infill with 3+…
58mm portafilter holders on a rail designed to use the existing mounting points and stock screws for the case of a Decent Espresso DE1Pro or DE1XL. Still fits into the transport suitcase easily. There is now a variant with a multi-pocket…
Arcade 1UP feet to raise the cabinet. Print 4 of them. The cabinet can be raised further with additional modules (coming soon). The pieces in the photo were printed with a 0.8 nozzle, layer 0.4 and 7% infill. For greater stability you can…
Printed well with a .4mm nozzle at .2 layer height. Remove speaker grille before installing. New cover fits flush with the backbox
This bracket allows you to mount a DE19 interface to the top rear of a Xiegu G90. You will have to replace 4 of the original M3 screws with M3x8 screws. You'll need to print two brackets one will need to be mirrored in your slicer. I…
This is a drop-in replacement for the Arcade1up restrictor-plate found on the Gen1 and 2 Street Fighter cabs. This will replace the 4-way restrictor-plate allowing for a much more fluid circular motion. The real arcade cabs used 8way…
This is to mount an aftermarket HDMI board that reuse the monitor from a Arcade1Up cabinet in the original control board location. HDMI board https://www.amazon.ca/dp/B07ZVMWPZP?ref=ppx_yo2ov_dt_b_product_details&th=1 Category: Toys & Games
Took inspiration from a model I found on thingiverse but started from scratch to make the rail a bit bigger to add stiffness. Models include a portafilter holder, RDT bottle holder, general hook, and a tamper holder specifically for the…
Arcade1up 4 way Adapter restrictor plate is used to change your 8 way joystick to a 4 way for classic games like Pac-man. The plate when printed fits extremely tight so not to move while playing. It slides under the dust washer on the…
I you are tired of the ceramic, wobbly, junky stock tray that makes using your scale almost impossible just print that one :D I use ABS with supports. Of course, print the tray and the grate separately. To make it more stable just use…
This is just for decoration! Don't recommend using it to assist twisting the portafilter. Something to replace the stock handle. Tested with PLA/PETG and screwed in fine.
The project this was remixed from did not have any variants that worked well for me, tweaked the dimensions to fit my machine perfectly. Category: Kitchen & Dining
1:8 dovetail jig Made to fit up to 9 8x10mm neodym magnets on each side (4 are plenty!). Made with a relief on each side so that the saw does not damage the jig. The magnets are also inset from the front so that the saw does not cut into…
I have a Ride1Up Roadster V2 ebike that uses this display that is somewhat common on other ebikes. But the problem with it is the plastic is brittle and the clamp is just a bit smaller than my handlebar so you can't really tighten in all…
work in process project added double bearing version that uses 6 MF85ZZ bearings drill shaft jig to hold shaft from turning in lathe.
All the modifications I made to GutBomb's original models were done in TinkerCAD. Printed on modified original Ender 3 (Direct drive, Sprite Extruder, CR Touch) eSun Bone White PLA+ filament used
Bracket top hold the Arcade1Up Marvel vs Capcom 2 PCB
This is a case for a minimalistic MiSTer setup with no I/O board and no USB hub board. It is designed for vertical RAM modules and the popular Noctua NF-A4x10 5V fan (any 40x40 5V fan will do the job). When installing the board, make sure…
If your Blade180cfx Landing Gear is broken you can print a new one. Category: Hobby
I've printed it with PLA, 20% infill. PETG would probably be better, but have not tested it. Sized to allow Radiacode 110 with silicone cover. Have not tested it without the cover. This is a pretty rough and basic model, and not an exact…
I wanted a way to hold filters on the side of my Decent Espresso machine and I already had this portafilter holder on one side of my machine. I heavily copied the design of that model so that it would match fairly well. This can be…
Compatible with Fujifilm DE100 and DE100-XD Photo Printers Can be printed on Bambu Labs printers (barely) with build volume of 256x256x256 or larger. If printed on a CREALITY K2 PLUS or PRUSA XL (350x350x350 or larger), the build volume…
This is a quick design to protect the underside and corners of your Altera DE1-SoC Board. M3 threads are included in the model. I used PrusaSlicer to create the honeycomb infill. Print settings: * 3 perimeters * 0 top & bottom layers * An…
Arcade1up 2 way Adapter restrictor plate is used to change your 8 way joystick to a 2 way for classic games like Galaga. The plate when printed fits extremely tight so not to move while playing. It slides under the dust washer on the…
A tablet stand that slides over the front lip of the de1 machine cover Original Diaspora discussion thread
PLA/0.4nozzle/0.2layer/infill 10%
I printed it with 0.2mm layer height default setting on my Prusa i3 MK3+. No special setting is required. You need a M3 thread tapper for mounting holes.
Nintendo Switch dock mount for those modding an arcad1up cabinet ( https://www.amazon.com/Fighting-Arcade1Up-Joysticks-Specially-Designed/dp/B08VJ8WRBK ) to connect to a Switch.
UPDATED VERSION I designed a version of the drip tray for the Arc, as you can't position it exactly under the drip tray. It has a slight slope to the front so that the water that drips into the bowl via the valve collects at the front. I…
Here is version 2 of the DE10 Nano Stack case. The Bunker! With thicker walls comes more filament usage but it can sustain a heavier assault from the dog snagging a cable and dragging it off the desk, down the hall and halfway down the…
Here is version 3 of the DE10 Nano Stack case. The Cube! With space for a 90mm fan, this rugged cube-shaped block of printed plastic armour should keep your DE10 cool and well protected. Like the bunker version before it, it is a fit and…
As titled. The coffee scale slot is not as flushed as others, I honestly prefer it this way. If your support game is on-point, I'd print it upside down. Less material, less thing to clean, and more interesting surface.
So you finally got the MiSTer FPGA thingy, the add-on boards have arrived and you have carefully built it... All wrong. Slowly pulled it apart then built it again, forgot the battery clock part... Urgh. Disassembled it again and wondered…
You can find my prints and creations for sale here: www.etsy.com/shop/HugoCraft I have the DE10 Nano so I can run the cores available on github under the MiSTer project. Since I'm waiting on the SDRAM addon and IO Board I wanted to still…
30mm fan cover for the DE10-Nano. The fan is positioned directly on top of the FPGA-SoC. Allows access to all GPIO, Arduino headers, ADC header, user switches, buttons and LEDs.
The KDE1 watch stand was designed to have a minimal design language, and simply to hold two watches. It has been designed to have watch faces display towards you, I hope you enjoy it and take pleasure displaying your watches no part…
You can find my prints and creations for sale here: www.etsy.com/shop/HugoCraft Remixed my original fan plate to use a 30mm fan that is more commonly used with raspberry pi cases. The fans I purchased came with 16mm long bolts and nuts so…
Overview Compatible with rail system for Decent DE1. 3D Printing Info Print Time : ~1hrs 30min on Prusa MK4 Material : PLA/PETG Supports : Yes, support enforcers for rail groove Infill : 15% Layer Height : 0.2 mm Perimeters: Default
Print with 100% infill (ABS or PETG) Screw - You can reuse Screw from your old Group head handle or buy one from amazon https://www.amazon.com/M10-1-5-Headless-Internal-Stainless-External/dp/B0D8TGTXQM
Canal Hummingbird has clearance issues with some Decent DE1 Espresso Machine groupheads. I designed three simple spacers (2mm, 3mm, 9mm thick) to be sandwiched between the polymer and metal basket holder. This should give clearance to the…
*** Please check out Mk II for an even better stand! *** I made a quick edit on Baca's model because his stand was made for the metal cover. This remix increases the gap so it can fit on the 4.60mm thick clear acrylic body cover. Not only…
sliced to fit on mk4s bed
Originally I made a quick edit on Baca's model because his stand was made for the metal cover. That remix increases the gap so it can fit on the 4.60mm thick clear acrylic body cover. That remix also increased the width from ~120mm to…
I designed these models to allow me to move the tablet to the rear of the chassis, allowing easier access to cups. I use one 3M control strip under the stand to keep the base firmly planted, and another one with a hook for routing the…
M3 offset couplers to mount a Terasic DE10 to a JammASD. Modelled with 4.1mm holes which should result in a 4mm hole after shrinkage etc to suit M3 brass inserts that have a 3.9mm lead. These are the inserts I used >…
I really wanted to have an all-in-one type console that had an NFC card slot to launch games and this ejector mechanism is great. I combined it with the footprint of the DE10 Nano stack - MiSTer project CUBE case. To keep things very…
Finally, a solution for mounting a Raspberry Pi inside a PC case! This interface plate allows you to mount from one to four Raspberry Pi computers on an 'ATLANTIS for MiSTer' carrier board. The mount has been designed to work with RPi…
I needed to use a right-angle USB cable to keep things clean and not sticking out the sides of the cube, so I made this remix. Print as you did with Side1, and everything should work fine. Made to work with this model: I used this USB cable
This gate restricts the movement of the joystick for fighting games on the Arcade1up cabinet. I have only tested this on my 1st generation Street Fighter II cabinet. After installation the joysticks felt tighter and more responsive.…
This is a new joystick actuator for an Arcade1up joystick. I tested it on a 1st generation Street Fighter II cabinet. This causes the spring to compress more than stock giving a stronger return to center.
The KDE1 watch stand was designed to have a minimal design language, and simply to hold two watches. It has been designed to have watch faces display towards you, I hope you enjoy it and take pleasure displaying your watches no part…
I needed to use a right-angle USB cable to keep things clean and not sticking out the sides of the cube, so I made this remix. Print as you did with Side1, and everything should work fine. Made to work with this model: I used this USB cable
I really wanted to have an all-in-one type console that had an NFC card slot to launch games and this ejector mechanism is great. I combined it with the footprint of the DE10 Nano stack - MiSTer project CUBE case. To keep things very…
As titled. The coffee scale slot is not as flushed as others, I honestly prefer it this way. If your support game is on-point, I'd print it upside down. Less material, less thing to clean, and more interesting surface.
This bracket allows you to mount a DE19 interface to the top rear of a Xiegu G90. You will have to replace 4 of the original M3 screws with M3x8 screws. You'll need to print two brackets one will need to be mirrored in your slicer. I…
Updated Version has a lot bigger openings for the connectors and better access to the sd-card slot.
The bearing grinder jig used to grind the bearings used in the VDE100 extruder. Remixed from Tom Brazier's tool to change the thread to fit my DREMEL 3000, though I believe most Dremels use the same thread (¾-12) so it likeley fits most…
Attach it to the pressure release outlet with a short piece of silicone tubing with an inside diameter of about 8mm. It will stop water release at high pressure form spilling out the drip tray
I needed to accommodate A/V Pro v9.2 IO board and AV Board v1.2 so I made this remix. Print as you did with Side2, and everything should work fine.
Recommended to print top-down so they are nice and flat. I used a smooth PEI sheet and PLA to be extra sticky. Just lay them on top of the buttons and put the lid on the cube, and you're good to go!
I broke the mirror of my Vorsa. needed a new clip. The front hole uses the included bolt - an m6 I think. The rear uses a m4 that I had laying around. 8mm long. Fits neat looks bad make it great
If your Blade130x Landing Gear is broken you can print a new one. Category: Hobby
I made this to make my commute to work easier since I like to charge my battery at work. I used an ikea night stand leg to connect the two parts together (1.73"x1.43"x13.17"), but I've included the step file and a link to the onshape file…
Requires one wheel and two inserts to be printed and glued into the wheel. Superglue worked for PETG prints. Printed using 15% honeycomb infill with 3 perimeters at 0.2 mm layer height using 0.4 mm nozzle. Printed on Prusa XL. In theory…
