1 / 2
Digital Measurement Extension for Metabo DH 330 Thickness Planer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Change your machine to a digital read out via an attached caliper.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 118
- Makes
- 0
- Views
- 760
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This 3D printed assembly allows you to measure the planing height of your Metabo Thickness Planer DH 330 accurately via a digital display.
A detailed PDF instruction will is included for download, explaining step by step:
- how to print parts
- how to assemble the parts
- how to install the parts
- how to calibrate the measurement device
In addition to the 3D printed parts, you will need:
- Digital Caliper
- E.g. model shown below. it requires the yellow marked features - most of the calipers have them!
- Cheap models are available starting from 3€ from known chinese platforms.
- Plastic can be a benefit
- Accuracy of 0.1mm is sufficient

- M4 Bolts:
1x 12mm
3x 16mm
1x 32-40mm (will later be cut)
- 6x M4 Nuts
- 3x M4 Washer
- Glue/ Double sidedtape