Universal phone, camera or tablet stand quick clamp upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fit a 5$ clamp on multiple sides, multiple phone positions; Bonus of 2 M6 nut insert. Infinite clamping possibilities.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 68
- Makes
- 0
- Views
- 534
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Pla; Draft mode with 10% infill only and no supports as most of my designs if you print the main file. Aprroximately a 3 hours print.
Upgrade your quick clamp with infinite possibilities with that universal phone, tablet and camera stand:
- Hold your phone on a waiting room arm chair;
- Hold your phone while recording a print;
- Hold your phone hidden under your desk at work (not responsible of damages of that one);
- Clamp your tablet to the living room table;
- Mount it on the frame of your 3D printer;
- Hold most cameras with 2 slots for M6 bolts in differents axis;
- Clamp it to any table in 5 seconds for a zoom meeting;
- Use it without any clamp on a flat surface (sooooo versatile design even the clamp is not necessary to enjoy it!);
- Use it to hold the camera/phone while recording a youtube video;
- Whatever you might imagine useful with this!
2 inserts for M6 bolt with 10mm hexagonal head. Use the bolt with 2 nuts; one for fixing it to the stand and the other to tight the camera at its final place.
No rotating parts in this design, rotate the clamp instead!
Quick tip, push the lock nut a the end of the clamp on one side or another to make it almost scratching while inserting the clamp. It will remain in place longer if you accidentaly flip it.