Counting matching models…
These are replacement pads for Irwin Quick Grip clamps. Printed in TPU flexible filament, these will not mar the surface of what you're clamping (just like the originals). I used Sainsmart TPU but any flexible filament will work. In order…
This converts your Irwin quick clamps into a device to hold two boards at a 90° angle. I added metric and standard measurements on top and large holes so screws can be placed while the clamp is holding the pieces together. 50% infil…
This replaces the soft yellow pads on the Irwin Quick Grip clamps.
This is an adapter for IRWIN Quick-Grip mini 152 mm (6 in) clamps to work with Festool track saw rails. The part number for the IRWIN is 1964743 and you can use the included hardware to attach the printed part to the camp.
For the past year, I have been using these Irwin clamps to hold two things together that I needed to glue. Almost always, they are these ¼-20 screws and a 3D printed part. I would always just lay the clamp down on the desk, but I don't…
Multiboard holder for the Irwin Quick-Grip 150mm(6")-610(24")mm Medium Duty clamps. The Heavy Duty clamps are thicker (wider) so don't fit. This holder uses Multiconnect connectors. 4 of them is sufficient. Multiconnect is much stronger…
Purpose built hook for hanging the Irwin VISE-GRIP Wire Stripper from the Honeycomb Wall Storage grid .
Based on the adapter I previously made for the mini Irwin clamps, I needed some more corner clamps so made my own this time. These will probably not be as strong commercially available clamps but will be suitable for most jobs. Would…
Angled 90degree jaws that fits Irwin 12" quick-grip bar clamp. Printing tips 0.2 layer height I used PETG and it works great
holds 5 irwin clamps with non marring pads on, 150mm quick clamp. 4 different models, printed it with pla+
Convert your Irwin quick-grip clamp for use on corners, be that picture frames cut at 45deg or 2 x square cut planks. Simply remove the standard rubber clamp boots and slide on the precision-fit clamp ends. It's made to fit tight but can…
Skadis mount for Irwin wirestrippers using universal hook system How to use: Open the .3mf file in prusaslicer (import geometry only) then slice to gcode. notes This model uses negative spacers which cannot be exported to stl as of…
I needed a storage system for my woodworking clamps. I had a variety and there wasn't anything I could find that was what I was looking for so I designed my own. I made them out of carbon fiber PLA for stiffness. There are different…
3x5 holder for the Irwin snap ring pliers and extras tips. Should also work for other brands (not tested).
This is an adapter for IRWIN Quick-Grip micro 108 mm (4.5 in) clamps to work with Festool track saw rails. The screw that comes with the clamp is not long enough to work with this adapter. You will need a longer M3 screw and nut to make…
Requires screws of at least 3.25 inches. Should probably be printed in PETG or something more durable than PLA. It holds 4 clamps and they aren't light This is an upload by request. I have not dialed in the design for this 100% but it is…
I bought the corner clamp accessories to help assembly a box I was making. I didn't realise these adapters were only for the medium-duty clamps whereas i have the mini clamps. So I printed this spacer adapter to allow the corner pads to…
The parent system is neat, but I needed a way to mount these IRWIN wire strippers: https://www.amazon.com/IRWIN-VISE-GRIP-2078300-Self-Adjusting-Stripper/dp/B000OQ21CA Additionally, I found some of the sidepiece flats and pins in the…
Make your Irwin Mini clamps into a box clamp. Do not sell the file or prints please
Whoops, printed the original before I saw the orientation of their honeycombs. I changed the hole to use SHCS instead of FHCS (counterbored hole instead of countersunk). I also added 5 mm to the length so the clamps are less likely to…
Super basic and quick model for holding wire strippers. I wasn't a fan of other loop-style models where you had to insert the tool upside down, and they'd bounce around. This model holds the tool by the wire cutting part, so expect some…
Be sure to print in a strong material of at least PETG, 3-4 walls, and 30%+ infill for durability and type of use. Also, I have added a v3 of the model that includes a stopper to help the attachment from sliding off.
Improved version of georgag's model with the following improvements: Beefed up neck that interacts with the Irwin bar More tolerance for Irwin bar (original was way too tight) Deeper inset for captured nut Better alignment for screw Print…
Printed in PLA, 0.6 nozzle, 0.3mm layer height, no supports needed. Designed for M4 Inserts in HSW. PETG not really recommended, too flexible.
Replacement pad for Irwin quick-grip For the handi-clamp series In size - 1 1/2" or 38mm I printed in TPU without supports! Very useful, there is no replacement part online
Stands for the smaller series of quick grip bar clamps from Iwrin (tested with my 12" and 18"). It may work on other models of clamps. Printed in PLA (more rigid than PETG, etc) with 4 perimeters and 15% infill. It isn't the fastest to…
Replacement pads/caps for Irwin & Bessey Bar Clamps. These should be printed in TPU or similar flex material - harder materials could still damage your workpiece and won't deflect enough to slide onto the clamp. These are snug and won't…
Having had several minor injuries over the years caused by scratching myself on protruding clamp ends while moving around a clamped-up work piece, and not finding any commercially available solution, I decided to fix the problem with 3d…
Irwin Quick Clamp pads for medium size clamps. These fit Irwin quick clamps that have a mounting surface of 1.25 x .75 inches. Print in TPU only. Print in orientation shown, print in “complete individual objects” mode for zero stringing…
Logos for Capri, Eastwood, Irwin and Wera Slice with .20mm QUALITY or SPEED and you shouldn't have any problems. If you need help with inserting color changes into the slicer, let me know and I'll show you how to have PrusaSlicer do it…
Saving Private Ryan - T4 Medic Irwin Wade - 1998
I designed this as a wall mounting bracket to hold a set of 4 Irwin brand chisels. I have it set up on a French Cleat wall but it can be mounted directly to a wall or onto a tool cabinet or table. This is one of many shop tool holders I…
This is a case for the Irwin/Hanson 12 pc metric tap & die set. Like alaubhan I found the factory packaging just wouldn't work for keeping the tools. I liked his "Tap / Die Tray for 12 Piece Irwin Hansen Metric Set"…
replacement for vise grip pads ( Irwin model quick-grip). Tool is not useful without the friction grip pads, here is replacement for n07 model (1964744)
Created because my drywall saw is pointy and scary. Tried @NT_1822008's model but it didn't fit my saw
Made a simple case nothing too fancy for my Irwin VISE-GRIP Convertible Snap Ring Pliers set. Separate slot for each of the different “heads”. If you would need to adjust the model due to printer tolerances for the lid fitting over the…
IRWIN VISE-GRIP Wire Stripper - https://www.amazon.com/gp/product/B000OQ21CA/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Over time, the irwin clamp pads wear out and have to be changed. I present my version of such a replacement. Plastic PLA+ was used, filling 30%. it is printed without supports, the nozzle is 0.4, the layer is 0.2. It is easy to put on the…
Gridfinity M3 & M4 Tap and Die holder for an Irwin Set with Hexagonal dies. It will also hold the proper size drill bit for each. Will stack with my other Gridfinity storage for the Tap and Die holders and the M5, M6, and M7 taps and dies…
The pads print quite smooth, so you might want to add some glue dots (or stick on some small rubber, cork or silicone pads) to add friction. You will need two pegs per pad to attach the pads to the clamp. The yellow pad in the pictures is…
Print with your favorite material, I used Sparkle ABS+ Bright Orange at 0.2mm layer height. Enjoy the easy open tool storage solution. Fell free to search my profile for more wall mount tool storage.
Replacement Micro Bar Clamp and Spreader pads for Irwin Quick-Grip & Dewalt. Printed on end with no supports in flex TPU at 0.3mm.
Mount for my Irwin pliers using Skadis T-Nut system. Due to print orientation i was not able to integrate the guides on the back, but it works just fine. All the slots are identical so tool position does not matter. I don't like how the…
This uses the DDD Printable Wall Control System ( github ) to mount the chisels and mallet. Use the Angle or L-Brackets for the sides - I used 2x1 L Bracket Flat Left and Right for the chisels and 2x2 Angle Bracket Flat Left and Right .…
🦫 Capybara Irwin – The Wildlife Legend in Miniature! Crikey! Meet Capybara Irwin – the ultimate tribute to the gentle giant of the animal kingdom and the adventurous spirit of the outback! Few supports are needed. I used organic-style…
Gridfinity Irwin Tap and Die Holder for Irwin set with hexagonal dies. Will stack with my other Gridfinity storage for the M3 and M4 set and the M5, M6, and M7 taps and dies to be the height of one standard divider bin. Check out my other…
Soft Jaw for IRWIN 4-in Cast Iron Drill Press Vise
Best printed from TPU, with 100% infill and 0.2mm layer height. Concentric infill is recommended.
# Irwin 4.0in Vise Soft Jaws Printable soft jaws for an Irwin 4.0in vise. ## Description Not affiliated or endorsed by Irwin. A set of soft jaws to be printed for working with delicate or prone-to-marring parts. ## Print Instructions…
Irwin Vise Grip Mount for Peg Boards with 1 inch (25.4mm) spaced holes that have a hole diameter of 3/16 inches (4.8mm).
hardware needed 1x M3x10 mm screw, Iso 10642 https://birgerahandel.dk/produkter-rustfri-syrefast-a2-a4/490-din-7991--m-3-rustfri-syrefast-a4-undersaenket-insex-skrue/1462-iso-10642-din-7991-m-3x10-rustfri-syrefast-a4-uh-insex-skrue/ 1x…
Irwin 90° internal and external wood clamp
Made my own soft vise covers that don't need magnets. They slide over jaws and stay in place. Warped first time printed had to use a brim second time.
Replaces clamp pad on older, large-size Irwin One-Handed Bar Clamp originally equipped with yellow rubber clamp pads. Might work on newer models too, but not tested on those. Print in flexible filament like TPU.
These couplers are printed on the narrow side down letting the plastic span across without using supports and giving linear strength. Like nearly any coupler, there will be a certain amount of bowing at the connection. These couplers fit…
If you have a Irwin Quick-Clamp, you can print this rotary fly tying attachment. THIS NEEDS ADDITIONAL SUPPLIES: 2 x 689zz bearings (9mmx17mmx5mm) 2 x M4 bolts approximately 3cm long 2 x M4 nuts 1 x M6 carriage bolt at least 60mm (the…
Modified robwand's soft jaws to fit my Irwin 4" drill press vise. Thanks to AvE for inspirational safety reminder. Category: Machine Tools
This is a replacement for the Irwin Quick-Grip clamp. It fits in the 12" clamp but will probably fit in others as well. Print Settings: Material - TPU Infill - 100% Supports - None needed
These allow you to use some cheap clamps from Home Depot with the TrueTrac track saw system. I really like the TrueTrac line of products and I'm sure they sell some nice clamps but I just needed these in a hurry so I designed them in…
This is a fancy sheath for an Irwin jab saw. Made it out of PETG. Fits a 1.55mm blade but should fit most saws. You can print 2 tone colours like I did (use superglue to join together) or you can just print the main body I have included…
You can spend more money on specialized tools to stretch canvas onto a frame, or you can re-purpose readily available (and locking, which is better) sheet metal pliers. The issue with sheet metal pliers is they can have sharp edges, a…
2 soft jaws to suit an Irwin Record Multi-Purpose 5" (12.5 cm) vice. 1 x flat. 1 x v-grooved. Print 2 of each file. The flat jaws are perfect for holding wood etc. without leaving marks. The v-grooved jaws are perfect for holding threads…
Two of the bases are needed to raise the clamp properly. The slot might need a little bit of filing down.
Have owned this Irwin Tap and Drill Set for years, and every time I used one of the drills and taps I would invariably bump the open package and knock all of the taps and drills out onto the floor. Hate is a strong word, but I really…
this is my go-to camera mount for the workshop and also out and about. it uses an Irwin QUICK-GRIP Bar clamp with a 13mm x 5mm bar, to attach your GoPro on a shelf or table or just about anywhere. This consists of 3 parts, no support…
Two bins available, a shorter one if you need vertical clearance and a taller one if you'd like to stack. Both bins have text for the corresponding bit size.
A friction fit cover for drywall saws with 165mm overall blade length, 23mm blade width at base.
gridfinity tray for a set or IRWIN bolt extractor socket set
Hey Team, The Irwin® Quick-Grip® is one of my favourite tools in the shed and can take some serious abuse. The ones I bought were second hand, and although in good condition, the rubber pads were looking a bit sad, and one of them was…
I designed this Irwin bar clamp holder to fit my clamps and hold them with easy in and out. This can be mounted in a variety of ways, I've used it on some wood to allow for 10 easily stored on my french cleat wall. Fits Irwin QUICK-GRIP…
Jig that fits the Irwin Quick-Grip 6 inch model of quick clamp and allows you to glue up at 120 degrees. Specifically the IRWIN QUICK-GRIP 1964758 One-Handed Mini Bar Clamp. The dimensions of the clamp heads are 21.4mm x 15.6mm x 5mm. The…
Needed a place to put my countersink bits. Where better than with the rest of them? This ended up being a great print to model, it worked on the first try! (not to brag) (kind of) Recommended Printing Specs (used for pictured print) :…
I made this to replace the slide on jaw protecters on the 6" Irwin clamps. (Joint Bridge-Irwin) I am also including the joint bridge that is flat top if you want to modify to your own clamp. (Joint Bridge.stl) Printed on Ender 3, PLA…
HSW tape measure holder for a 3 meter Irwin brand tape measure. Pocket clip broke off long ago so not sure if that will make a difference on fit. Dimensions Walls - 2mm Height - 27mm ID Depth - 24.5 ID Length - 60mm
Extend the clamping capacity of your irwin clamps by coupling two together. Remove the head of the clamps and use this print to couple the bars. Rotate to print both parts flat side down. Embed M6 nut into the hex depression with either…
Vise Jaws for Irwin 4 1/2" Vise. Jaws protect items when clamping delicate pieces. Can print with either PLA or PETG. Printed at 100% infill. Press 8 mm dia x 3mm height magnets into depressions so the jaws will attached to the vise.
bought a small tap and die set from a big box store. didn't come with a case. used small magnets to hold the dies and another magnet in the lid to hold the case closed. specifically i think it was this product:…
Crafted with sincere love to replace a lost pad - can you believe people will throw away a perfectly good tool for something so minor?
Replacement jaws for 6in Irwin vices. The jaw should printed out of a durable material- the original is ABS and is holding up well. It is attached to the vice using the screws that hold the stock jaws on and the soft jaw insert is slid in…
This is a remix of an Irwin 5-piece countersink bit holder that is a great model. The only problems were the tab breaks and the smallest bit holder was not quite the right fit. This is my effort to fix those problems by adding a latch and…
These are Gridfinity bins for the Irwin 3/8" Forstner drill bit set of Imperial sizes. The set is advertised as "14 sizes" but it's really 13 sizes with the 1/4" bit duplicated (huh?). The fraction labels on my smaller tray didn't turn…
Flexible jaws, I used flexible pla at 25% infill. I included 2 sizes of convex and concave parts.
Box to store Irwin Speedbor bits (IRWIN SPEEDBOR Drill Bit Set for Wood, 4-Inch, 6-Piece (1877239))
bender guide for hilmor irwin pipe benders 15mm and 1/2inch copper, can be printed in pla, print virtually solid!!!
Print as uploaded, Printed in PLA Pro with 15% infill 3 shells.
This bracket allows a for several boom arms to be attached to a medium sized irwin clamp. The thumb screws were taken from the original boom arm table clamp. Non printable parts required: 1x cheap Boom arm from amazon 1x medium size irwin…
I made a tray to hold this set of chisels in my toolbox. The chisels are sharp so they need to be under control. The tray is too large to fit in most printers, so I broke it into two parts that fit together with a sliding dovetail.…
Printed in .28 eSun pla+ ID hole = 13mm, OD 18mm, 45mm Deep
Lost one of the original pads, so I designed this replacement. Hope it helps folks!
I am the creator of the simple 90 lens . These are the waterhouse stops that work with the lens. Included here are stops 2.8 through 16. Also included is one blank chip that can be modified by the user to other stops or even other shapes…
Screw mounted holder for irwin wire strippers, I printed in creality petg on my p1s, no supports needed.
This is a storage box for the mini Irwin Industrial Tools 24605 12-Piece Machine Screw with Fractional Tap and Die Set. It should also fit their 1765541 Metric 3-7mm 12-piece set. The sliding top has an STL for a plain version, as well as…
Spare rubber for Irwin clamps
Designed for the Irwin Marples set I bought on amazon https://amzn.to/3wqY7VU Suitable for other Irwin sets too. The t-nut version doesn’t need supports and uses 2.5 t-nuts with M2.5 screws/nuts, while the hook version requires supports.…
As the original one by The Redcoat is too big for my clamps, I decided to take some measurements and scale the model down. My clamps are different, and quite old, but with the right measurement, they fit snuggly in any of them! The…
For use with low-weight QRP antennas only (MFJ-1899T, Elecraft AX1/AX2). Works well with PLA. To attach, unscrew half of clamp opposite of handle, slide onto metal bar. It will require some effort, but the snug fit helps keep the antenna…
The Irwin Mini Vise jaws are attachments that just slip on your mini Irwin vise, In this download you get 2 STL files one jaw to hold round stock , And the other to hold 3mm flat bar stock flat (As can be seen in pic 3) This will make it…
This is a tool holder for 4 Irwin Quick Clamps These are usually really annoying to hang on a pegboard, but this keeps them in a nice straight line. Use it with 2x2 Angle Brackets from the DDD system to mount on your board. I also…
Wall hanger for (5) five Irwin Quick-grip Medium Duty clamps. This is a remix with sy's peglock pegboard system My printer is down so I have not test printed yet. I think it can print without support if it bridges the sy's peglock…
I needed some soft jaws for my vise since the original only came with a serrated face.
