ORBITER V3 SUPER V (BETA)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Supervolcano and Smart Orbiter V3 mount for VORON 0
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 30
- Makes
- 1
- Views
- 1,164
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
!!!!!!!!!!!!!!WARNING!!!!!!!!!!!!!!!
THIS IS A BETA
I havent printed or tried this yet.
Smart Orbiter V3 Super Volcano mount for Voron 0. I had made a mount that supports the standard hotend that comes with the Orbiter V3, but it had to be mounted lower, door had to be off, and belts had to be cut. In order to combat this I designed a new mount, but you must use a super volcano or something similar in length, to reach the build plate.
I stayed within the same footprint of the mini stealthburner so there should be no build volume loss. Should actually gain a few mm in the Z axis. If your origin changes due build volume gain adjust your axes limits accordingly and as well as your slicer, in most slicers you can exclude areas, so exclude the extra build volume that is not on your plate.
Original Mount: https://www.printables.com/model/802440-dslr-toolhead-smart-orbiter-v3-voron-0-beta
PRINT SETTINGS:
Print on flat side
Enable Auto Tree Supports
Voron Print settings