1 / 8
30 amp/125V Marine/RV Female cable connector renewal — image 1
1 / 8

30 amp/125V Marine/RV Female cable connector renewal

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a solid fix for a $130 cable commonly used in Marine and RV shore power.

Rating
0 / 5
Likes
5
Downloads
27
Makes
0
Views
295
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

This is a solid fix for a $130 cable commonly used in Marine and RV shore power. When the HOT connector ages and corrodes it will heat up and melt the surrounding plastic. Cleaning up the corrosion is only part of the fix. You want the cable to seal well for a longer life. This fixes that expensive cable so you can get more life out of it. It is a two-part solution. It uses an ASA interior plug cap. That is more heat resistant, and a TPU outer boot. It is important that you remove the existing corrosion using very fine emery paper, and a contact cleaner. A popsicle stick makes a great way to polish it. The dimensions are solid and shouldn't require much trimming for fit. Cut away the old cover to the line shown and simply snap your new pieces in place. Use a NOX corrosion protectant on the terminals and plug it back in. Monitor the cable closely for excessive warmth under heavy loads. You should be good to go. Use at your own risk. Cheers!

Tags