EXPERIMENTAL Ender 7 Stock Motors decouplers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Decouplers that maintain the stock mounting frame for cooling purposes, elongates motor life, may get better quality
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 25
- Makes
- 0
- Views
- 361
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
!!! The BEARING SEATING is at 22.1mm, it is recomended to print a fitting test before!!!
ONLY FOR 20TOOTH PULLEYS, NOT STOCK ONES
BOM for each of the towers:
top to base: 3 M6X25 Screws ; 3 M6 heat inserts
motor to stock support: 4 m3x16/m3x15 screws
frame mount: 4 M4X25 screws + 4 M4 Nuts + 4washers
2x 608 ball bearings (8x22x7)
1 elastic coupler L25D19/D20 (feel free to use membrane, elicoidal or red rubber couplers)
inner diameter 8mmx8mm /8mmx5mm if not using stock motors
1 31mm shaft, 8mm diameter
###PROTOTYPE###
the files may contain minor preject or measuring errors