1 / 7
maps Ender 3 and Ender 3 Pro Belt Tensioner Fat pack — image 1
1 / 7

maps Ender 3 and Ender 3 Pro Belt Tensioner Fat pack

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fat pack with solutions i put on my Ender 3 and Ender 3 Pro remix for belt tensioning

Rating
0 / 5
Likes
9
Downloads
72
Makes
0
Views
573
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Main positive points from this design:

  • Fat pack with solutions
  • more easier to assemble the belt with the tensioner mounted
  • adapted for a roller GT2 20 with inner diameter of 3mm instead of the stock one.
  • Still with the bushing for the stock roller
  • belt's allways inside of the frame
  • my pretty knob is included in this remix

BOM:

  • 2 M3x20 screws
  • 2 M3 Hexagonal nuts
  • 1 Tnut for the X axis frame and screw
  • 2 roller GT2 20 with inner diameter of 3mm (optional)

History:

For almost the beginning of my printing adventure i used the MakeChetti with good results, but it was always difficult to mount the belt with it in place.

Even with the tensioner the prints didn't had the quality that i liked to have and not like i saw on other makers videos. Then one day i found this Y belt mod and i printed and give is a try.

But when i try to mount it i broke the tensioner case because it was too tight to mount.

So i decided to remix it and make it stronger. I changed the Y case tansioner and the tensioner puller to have more space to mount the belt, and after reading the TeatchingTech article about the calibrating the step motors i had to install also a GT2 20 with inner diameter of 3mm to increase the quality.

i have included the X belt mod and one  Y belt mod to ensure that the belt is always inside of the frame slot and not interfering with it. It's also a must have. The how to install them are on the links.

With all this modifications to my Ender 3 my print improved a lot. 

Follow me for more designs and updates.

If you like my work, support and  “buy me a criptocoffe" 

Also, share some makes in here!

 

Updadte 2025.11.15

Now I have also an Ender 3 Pro. So i add a litle remix for the Y axis. Also a new version of the screw puller to work with a GT2 timing belt pulley.

Disclaimer:

You are a grown up, do it at your responsibility. If not, do it with parent supervision with their approval… hehehe

Good Luck and good prints

Tags