1 / 1
OLight Magnetic Charger Caps (Baldr Mini/Odin Mini) — image 1

OLight Magnetic Charger Caps (Baldr Mini/Odin Mini)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

These are designed to fit OLight Magnetic Chargers to protect the magnetic face when not in use.

Rating
0 / 5
Likes
5
Downloads
37
Makes
0
Views
429
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

These are designed to fit OLight Magnetic Chargers to protect the magnetic face when not in use. Unfortunately, OLight seems to have a slightly different charger for each light (at least the two I have are different.) You could probably resize one of these if they don't fit your particular charger and it would be good enough, but on mine, the cable connected with slightly different geometry, so I made a separate model rather than resizing.  

They are designed to fit the following: 

  • OLight Blader Mini
  • OLight Odin Mini 

 

During my prototyping phase, I had some tight fits that were very difficult to remove, so I added a little hole to make removing the cap easier if it was too tight. Now that I've finalized my designs, they should be snug fits that are easy to remove, but I've included the versions that have a hole on the bottom if you have any concerns about it. 

Tags