Auto-aligning T-Slots ( Alu inserts) M3, M4 and M5
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Recreation of the Prusa XL auto aligning T-slots (Aluminium profile inserts) for M3, M4 and M5 hex nuts.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 22
- Makes
- 1
- Views
- 145
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
Recreation of the t-Slot auto aligning incert sof the Prusa XL for different hex nut sizes (M3, M4, M5).
so Far I tested only the M5 and M3 it worked great. ( Do not worry if the winds break or bend while inserting, as soon as they do not fall completely of it will work as intended)
I would recomend to print it in PETG to give a bit more elasticity to the wing.
| Recommended Slicing settings | |
| Material | PETG (or PLA) |
| Nozzle size | Max. 0,4 mm |
| Layer height | Max. 0,2 mm |
| Supports | ON - Paint Manually ( not needed for the wings) |
Installation:
Add the Hex nut on the back of the T-slot.
Insert the T-slot in the slot like the following picture ( taken from Prusa asssembly guide):
Please let me know if there is any issue with the design or something does not fit. I will try to fix it :)